Energy Equipment

Female Elbow 90°​

  • BSP Threaded Eds
  • Working Pressure: 150lbs (psi) / 10bar
  • Working Temperature: 250°C at 10bar
  • Investment lost wax casting manufactured to ISO 9001 : 2015
  • Thread ends conform to ISO 7-1 & ISO 228-1
  • Male Threads are Tapered (BSPT), Female Threads are Parallel (BSPP)
  • Mill Test Certificates (EN10201 Type 2.2) available with all si
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
SKUStockSizePricePrice 9+ Add to QuoteBuy
1100291Clamp for 10-70mm cable
Birdmark Afterglow is a perforated disc, containing all of the reflective and luminescent properties for migrating birds in both daytime and nighttime flight. The disc absorbs and emit purple ultraviolet light visible to the birds as violet but appears as white plastic to humans. You will see the product glow for 10-12 hours after sunset. The Birdmark alert passing birds of obstruction ahead on the marked wire. The product wiggles in the wind back and forth to flash at approaching birds during windy days.
- +
1099291Clamp for 6-16mm cable
Birdmark Afterglow is a perforated disc, containing all of the reflective and luminescent properties for migrating birds in both daytime and nighttime flight. The disc absorbs and emit purple ultraviolet light visible to the birds as violet but appears as white plastic to humans. You will see the product glow for 10-12 hours after sunset. The Birdmark alert passing birds of obstruction ahead on the marked wire. The product wiggles in the wind back and forth to flash at approaching birds during windy days.
- +
1010Clamp for 10-70mm wire

The FireFly is used to prevent collisions with power lines and also to prevent roosting on towers and wires. The FireFly prevents collisions with power lines (both transmission and distribution) and also prevent birds from roosting on towers and wires within a 10-meter radius of the installed product. As many bird species can see in the ultraviolet spectrum of sunlight, the birds will avoid the product. The FireFly rotates in the wind both day and night to alert approaching birds to an obstruction in their flight path. The FireFly utilizes both reflective and UV absorption in the high impact plastic plate. Complete with SnapFast clamp for power lines/conductors/cables/wires.

- +
1019Clamp for 6-16mm cable

The FireFly is used to prevent collisions with power lines and also to prevent roosting on towers and wires. The FireFly prevents collisions with power lines (both transmission and distribution) and also prevent birds from roosting on towers and wires within a 10-meter radius of the installed product. As many bird species can see in the ultraviolet spectrum of sunlight, the birds will avoid the product. The FireFly rotates in the wind both day and night to alert approaching birds to an obstruction in their flight path. The FireFly utilizes both reflective and UV absorption in the high impact plastic plate. Complete with SnapFast clamp for power lines/conductors/cables/wires.

- +
h25haLetter A

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hb0Letter B

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hc0Letter C

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hD0Letter D

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25he0Letter E

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hf0Letter F

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hg0Letter G

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hh0Letter H

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hi0Letter I

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hj0Letter J

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hk0Letter K

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hL0Letter L

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hM0Letter M

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hn0Letter N

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25ho0Letter O

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hp0Letter P

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hq0Letter Q

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hr0Letter R

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hs0Letter S

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25ht0Letter T

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hu0Letter U

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hv0Letter V

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hw0Letter W

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hx0Letter X

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hy0Letter Y

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hz0Letter Z

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25h00Number 0

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25h10Number 1

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25hn-70Number 2

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25h30Number 3

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25h40Number 4

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25h50Number 5

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25h60Number 6

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25h70Number 7

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25h80Number 8

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

h25h90Number 9

The system consists of baseplates with letters, numbers and characters. The edge of the baseplate is folded so that they easily can be slipped in and assembled. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters. To ensure ultimate weather resistance they are made from weatherproof aluminium and then coated with a unique varnish after printing.

The system is used for marking powerline poles, disconnecting switches, cable cabinets, transformer stations, signposts, electric plants, device marking, lightning poles etc. The characters are punched out of yellow 0,7 mm aluminium Theoretical reading distance is approx. 10 meters.

Application examples:
Cable cabinets, power poles, disconnectors, lighting poles, transformers, transformer stations, electric plants,

 

 

H50HBP390500mm base plate

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50h9325Number 9

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50ha48Letter A

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hb99Letter B

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hc125 Letter C

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hd390Letter D

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50he25Letter E

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hf390Letter F

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hg50Letter G

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hh50Letter H

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hi50Letter I

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hj25Letter J

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50ha-425Letter K

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hl150Letter L

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hm300Letter M

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hn48Letter N

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50ho48Letter O

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

h50hp150Letter P

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hq25Letter Q

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hr300Letter R

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hs200Letter S

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50ht750Letter T

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hu175Letter U

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hv175Letter V

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hw75Letter W

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hx0Letter X

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50hy0Letter Y

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

h50hz0Letter Z

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50h0550Number 0

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50h1425Number 1

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50h2225Number 2

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50h3350Number 3

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50h4398Number 4

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50h5374Number 5

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50h6350Number 6

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50h7425Number 7

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50h8325Number 8

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

- +
h50va0Letter A

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vb25Letter B

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50vc0Letter C

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vd0Letter D

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50ve0Letter E

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vf75Letter F

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50vg0Letter G

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vh0Letter H

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vi0Letter I

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vj0Letter J

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vk100Letter K

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50vl400Letter L

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vm225Letter M

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vn0Letter N

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vo0Letter O

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vp0Letter P

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vq0Letter Q

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vr75Letter R

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50vs125Letter S

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50vt300Letter T

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50vu200Letter U

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50vv175Letter V

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vw0Letter W

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vx0Letter X

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vy0Letter Y

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50vz0Letter Z

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

h50v0250Number 0

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50v1325Number 1

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50v2150Number 2

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50v3200Number 3

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50v4175Number 4

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50v5225Number 5

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50v6500Number 6

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50v7300Number 7

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50v8175Number 8

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
h50v9175Number 9

This marking system is used for marking transformer cabinets or stations, disconnecting switches, outdoor switchyards, disconnectors, cable cabinets, device marking, pole stations, powerline poles, etc. The characters are screen printed in black with yellow background and varnished after printing.

Theoretical reading distance is approx. 20 meters.

Designed for verticle marking

- +
109678Clamp for 10-70mm cable

The QuikMark marker is a highly visible marker. They effectively prevent costly line damage and outages caused by collisions with tall equipment. These economic markers also work on higher lines at heliports, river crossings, and other high traffic areas. QuikMark installs in seconds from the ground or a bucket. Our patented and rugged SnapFast mounting clamp prevents line slippage on single or bundled cables. QuikMark is ideal for construction sites, industrial plants, marinas, or anywhere machinery can strike low hanging distribution lines. The lightweight 260mm diameter day-glo orange plastic disk, with a yellow centre reflector, is highly visible to machine operators. Its patented SnapFast spring clamp allows fast and simple installation by a hot stick.

- +
109778Clamp for 6-16mm cable

The QuikMark marker is a highly visible marker. They effectively prevent costly line damage and outages caused by collisions with tall equipment. These economic markers also work on higher lines at heliports, river crossings, and other high traffic areas. QuikMark installs in seconds from the ground or a bucket. Our patented and rugged SnapFast mounting clamp prevents line slippage on single or bundled cables. QuikMark is ideal for construction sites, industrial plants, marinas, or anywhere machinery can strike low hanging distribution lines. The lightweight 260mm diameter day-glo orange plastic disk, with a yellow centre reflector, is highly visible to machine operators. Its patented SnapFast spring clamp allows fast and simple installation by a hot stick.

- +
Q46200N2004.6x200mm
Quiklok ties, flame-resistant tool-less zip tie made from UV rated Nylon for corrosive environments.
  • No water absorption
  • Flame resistant
  • Excellent chemical resistance
  • Smooth surfaces and rounded edges ensure cable protection and worker safety
  • Provide the ultimate support for network cables
  • Available in various lengths and widths
- +
Q46350N6304.6x350mm
Quiklok ties, flame-resistant tool-less zip tie made from UV rated Nylon for corrosive environments.
  • No water absorption
  • Flame resistant
  • Excellent chemical resistance
  • Smooth surfaces and rounded edges ensure cable protection and worker safety
  • Provide the ultimate support for network cables
  • Available in various lengths and widths
Q76450N2007.6x450mm
Quiklok ties, flame-resistant tool-less zip tie made from UV rated Nylon for corrosive environments.
  • No water absorption
  • Flame resistant
  • Excellent chemical resistance
  • Smooth surfaces and rounded edges ensure cable protection and worker safety
  • Provide the ultimate support for network cables
  • Available in various lengths and widths
Q46150C8034.6x150mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
- +
Q46700C04.6x700mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q46200C8034.6x200mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
- +
Q46250C3004.6x250mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q46300C3004.6x300mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q46350C20424.6x350mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q46450C20424.6x450mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q79700C07.9x700mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q46150U2894.6x150mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q46200U2894.6x200mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q46250U31724.6x200mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q46300U31724.6x300mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q46350U2104.6x350mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q46450U2894.6x450mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q79250U2007.9x250mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
Q79700U2897.9x700mm
Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Coated with polyester epoxy resin coating to prevent dissimilar metal corrosion, coating has been  tested to 180 degrees for a 15min period and passed this test successfully.
  • 25+ year lifetime
  • Non-flammable
  • Excellent ultraviolet resistance
  • Excellent chemical resistance
  • Provides a strong, durable method of cable bundling
  • Can be used in a wide range of indoor, outdoor and underground applications
  • Smooth surfaces and rounded edges assures cable protection and worker safety
  • Provide the ultimate support for network cables
  • Marks the position of nearly invisible wires for cranes & high vehicles.
  • Can be used to mark smaller wires such as earth wires as it weighs only 180 gm and causes almost no windage.
  • Can be used as an aircraft warning flag for helicopter operations
  • The diamond grade reflective patch shines in sunlight or at night with incident light aiding visibility
  • This marker has a snap clamp that is easily fitted to conductors with a hot stick from the ground.
  • Approved for use by power companies as it will not damage their conductors and prevents accidents
  • Prevent danger to staff and damage to equipment and avoid costly claims from power companies
  • More durable and easier to install than pennant style flag strings
- +
1055230Clamp for 6-16mm cable
  • Marks the position of nearly invisible wires for cranes & high vehicles.
  • Can be used to mark smaller wires such as earth wires as it weighs only 180 gm and causes almost no windage.
  • Can be used as an aircraft warning flag for helicopter operations
  • The diamond grade reflective patch shines in sunlight or at night with incident light aiding visibility
  • This marker has a snap clamp that is easily fitted to conductors with a hot stick from the ground.
  • Approved for use by power companies as it will not damage their conductors and prevents accidents
  • Prevent danger to staff and damage to equipment and avoid costly claims from power companies
  • More durable and easier to install than pennant style flag strings
- +
105072Clamp for 6-16mm cable
  • Marks the position of nearly invisible wires for cranes & high vehicles.
  • Can be used to mark smaller wires such as earth wires as it weighs only 180 gm and causes almost no windage.
  • Can be used as an aircraft warning flag for helicopter operations
  • The diamond grade reflective patch shines in sunlight or at night with incident light aiding visibility
  • This marker has a snap clamp that is easily fitted to conductors with a hot stick from the ground.
  • Approved for use by power companies as it will not damage their conductors and prevents accidents
  • Prevent danger to staff and damage to equipment and avoid costly claims from power companies
  • More durable and easier to install than pennant style flag strings
- +